E1/10/100Base-T Protocol Conve
Product details
 
The design of ZBC-ECON02 adopts the ASIC chip as the core, which features simple circuits and compact structure and enhances the reliability of the integrated equipment. The lb-ECON02 provides data transmission channels at a maximum bandwidth of 2.048M for the Ethernet over coaxial cables and connects two LANs through coaxial cables. It is applicable to multiple application scenarios including LAN extension, network isolation, and access of LAN into WAN. It connects an Ethernet network to a telecommunications transmission network, a private network or a WAN.
 
Features
Supporting IEEE802.3Q VLAN frames and 1536 bytes jumbo frames
Supporting data transmission from 10/100M Ethernet to E1
Configurable Ethernet bandwidth, supporting a maximum rate of 2.048 Mbps
Supporting full-duplex PAUSE flow control function
Supporting address filtering function
RJ45 interface, supporting adaptive crossover and straight-through cabling
Supporting the reset of a remote system from a local system
Supporting audio alarm function, with the audio alarm system to be disabled by the user at any time
Supporting E1 line loopback function
Built-in switching power supply, overall power consumption < 3W; external 220V AC and -48V DC interface
 
 
 
 
Parameters
Parameter
Specifications
Protocols and Standards
Supporting IEEE802.3.d Spanning Tree, IEEE802.3Q VLAN frames and 1536 bytes jumbo frames
E1 interface
In compliance with ITU-T G.703/G.704 protocol
Rate: 2.048 Mb/s
Code pattern: HDB3
Interface impedance: 75W BNC interface (unbalanced)/ 120W RJ45 interface (balanced)
Permitted input frequency shift: 2.048MHz 100PPM
Jitter characteristics:  G.823 recommendation
Ethernet Interface
In compliance with IEEE802.3/IEEE802.3u standard, using standard RJ45 connector
Supporting wire-speed 10Base-T/100Base-TX, full duplex/half-duplex adaptive mode
Supporting automatic crossover of twisted pairs
Bit error rate
<1/1000000000
Power
Capable of dual power supply, mutual hot backup
AC 220V: 220V (AC) input, allowing 175V~264V (AC)
DC -48V: -48V (DC) input, allowing -40V~-60V (DC)
Power Consumption
<5W
Operating Environment
Operating temperature 0~55C
Relative humidity: 95% (at 25C)
Dimensions
212mm (L)*150mm (W)*38mm (H)
 

   
 
Shenzhen Federal Communications Technology Co., Ltdri   
Address: Qihang Building 502,Longtang Community,Minzhi street,Baoan District,Shenzheng
Contact: Miss Ma  Tel: 086 -0755-29185271  Mobile: 13590447858   E-mail: szlbtxjs@163.com
You are the first Members visitors